Haier 1U09EH2VHD User Manual

49-7835 Rev. 8 12-20 GEA
Ductless Single Zone with Highwall Indoor Unit
Zone simple sans conduit avec unité intérieure en hauteur
Unidad Interna para Pared Alta sin Conducto y de Zona Única
Design may vary by model number. L’aspect peut varier selon le numéro de modèle. El diseño puede variar según el número de model.
Installation Manual
Manuel d’installation
Instrucciones de instalación

Haier 1U09EH2VHD Specifications

General

Cooling Capacity	9000 BTU/h
Energy Efficiency Ratio (EER)	3.21
Refrigerant	R32
Power Supply	220-240V, 50Hz
Outdoor Unit Noise Level	50 dB(A)
Operating Temperature (Cooling)	18°C to 43°C
Dimensions (Outdoor Unit)	700 x 245 x 540 mm

Summary

INSTALLATION INSTRUCTIONS

Step 1: Outdoor Unit Location and Prep

Step 2: Indoor Unit Installation

Details the procedures for installing the indoor unit, including mounting and connections.

Select Indoor Unit Location

Install Indoor Unit Mounting Plate

Install Indoor Unit Tubing

Indoor Unit Electrical Connections

Details on how to make safe and correct electrical connections for the indoor unit.

Mount Indoor Unit to Wall Plate

Steps for physically hanging and securing the indoor unit onto the wall-mounted plate.

Indoor Unit Condensate Drainage Setup

Step 3: Outdoor Unit Installation

Details the procedures for installing the outdoor unit, including connections and testing.

Prepare Outdoor Unit for Installation

Outdoor Unit Electrical Connections

Install Copper Lineset

Outdoor Unit Leak Test Procedure

Steps for pressure testing the system to detect refrigerant leaks.

System Evacuation Process

Process for removing air and moisture from the system using a vacuum pump.

Refrigerant Charging Procedure

Instructions on how to add the correct amount of refrigerant to the system.

Step 4: Final Checks and User Handover

Covers final system checks, test runs, and explaining operation to the end user.

Explain Operation to End User

Test Run and System Checks