９
time the Red Wine light may stay on.
INSTALLATION AND ACCESSORY PARTS
Temperature Adjustments:
Electronic control unit: See fig.#1
z The wine cooler is preset in the factory to automatically accommodate
temperature requirements for red or white wines. If you store mostly white
wines, press the “White Wine” button and the wine cooler will maintain an
average temperature between 7℃ to 10℃.Pushing the “Red wine” button will
yield an average temperature between 13℃ to 16℃.
z The wine cooler can be set to any temperature you desire to accommodate
your wine storage requirements. To set the temperature, press both the
“White Wine” and “Red Wine” button simultaneously and hold for
approximately 3 seconds. Now you are in temperature set mode. Decrease
the temperature by pushing the “Whine Wine” button and increase the
temperature by pressing the “Red Wine” button. Pressing the appropriate
button 3 times will adjust the temperature 3 degrees, press 4 times equals 4
To Next Page
Loading...
