What to do if there is no sound on my Haier L19A11W Receiver?
If there is no sound on your Haier TV Receiver, first, ensure that the MUTE button hasn't been activated. Then, switch to another channel to see if the problem persists. Finally, press the VOL+ button to increase the volume.
Why does my Haier TV Receiver have a blank screen?
If your Haier TV Receiver screen is blank, make sure the correct signals are being input. Try pressing the TV/AV button to change the signal input to TV. If the issue continues, try restarting the television if the power supply was interrupted.
How to fix a Haier L19A11W TV Receiver that is out of control?
If your Haier TV Receiver is out of control, disconnect it from the power supply. Wait 10 seconds, then reconnect it to the power supply.
What to do if my Haier L19A11W Receiver has no picture on some channels?
If your Haier TV Receiver shows no picture on some channels, verify that the correct channel is selected. Also, adjust the antenna and make further adjustments using FINE TUNE and MANUAL SEARCH.
General| Screen Size | 19 inches |
|---|---|
| Display Type | LCD |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| TV Tuner | Analog |
| Speakers | 2 x 3W |
| Weight | 3.5 kg |
| Viewing Angle | 170°/160° |
| Input Ports | Composite, Component, VGA |
| Dimensions (W x H x D) | 460 mm x 360 mm x 160 mm |
| Resolution | 1366 x 768 pixels |
To Next Page
