DVD TROUBLE SHOOTING
Ensure you have set the AUDIO settings
correctly.
If you have any questions, please consult the troubleshooting guide below:
NO PICTURE OR SOUND
Ensure the power button is on.
Ensure the power outlet is operational.
Ensure the power cord is not damaged.
Ensure the power plug is connected
firmly to the outlet.
PICTURE BUT NO SOUND
Ensure the audio is not set to mute.
POOR PICTURE OR SOUND
Ensure you have set the player s AUDIO
settings correctly
Ensure the disc is not scratched or stained.
“BAD DISC”DISPLAYED
Ensure the disc is not warped, damaged or
deformed.
Ensure the disc is not badly stained or
damaged.
Ensure the disc format is compatible with
the player.
Please check whether you have tried to play a
software CD. If so, please restart the player.
REMOTE NOT WORKING
Ensure the batteries in the remote control are
working.
Point the remote control directly at the player s IR
sensor.
Remove any obstacles between the remote and the
IR sensor.
UNIT NOT WORKING
Turn off the power, and then turn it on
again.
“NO DISC”DISPLAYED
Ensure you have put the disc in the DVD player.
Ensure the disc is inserted properly
(shiny side facing out).
Ensure the disc is not distorted, stained or
scratched.
-21-
To Next Page
Loading...
Need help?
General
