Why does my Haier Cookers oven appear not to work?
Your Haier Cookers oven might not be working due to a blown fuse or tripped circuit breaker in your home. Replace the fuse or reset the circuit breaker. Also, the oven controls may be improperly set, so consult the Using the Oven section. Finally, check if the oven is accidentally in Sabbath Mode, and disable it if necessary.
What to do if food does not bake properly in Haier Cookers oven?
If food isn't baking properly in your Haier Cookers oven, the oven controls may be improperly set, so review the Cooking Modes section. The rack position might be incorrect or not level, so consult the Cooking Modes section and Cooking Guide. Also, ensure you are using the correct cookware or size by checking the Cookware section. Finally, the oven temperature may need adjustment; refer to the Oven Controls section.
What to do if food does not broil properly in Haier Cookers oven?
If food isn't broiling properly in your Haier Cookers oven, make sure you select the appropriate broil mode using the oven controls. Also, ensure you're using the correct rack position by checking the Cooking Guide. Use a pan specifically designed for broiling. If using aluminum foil on the broil pan, wrap it tightly and add slits conforming to those in the pan to allow grease to drain.
Why are surface units on my Haier QSS740 not maintaining a rolling boil or cooking fast enough?
The surface units on your Haier Cookers may not maintain a rolling boil or cook fast enough due to improper cookware. Use pans that are flat and match the diameter of the surface unit selected. In some areas, low power (voltage) can also be a factor. Cover the pan with a lid until the desired heat is obtained.
Why do surface units on my Haier Cookers not work properly?
If the surface units on your Haier Cookers aren't working properly, a fuse in your home may be blown or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. Also, the cooktop controls may be improperly set. Check to see the correct control is set for the surface unit you are using.
How to prevent scratches on my Haier Cookers cooktop glass surface?
To prevent scratches on your Haier Cookers cooktop glass surface, use the recommended cleaning procedures. Ensure the bottoms of your cookware are clean before use and that you're using cookware with smooth bottoms. Scratches are not removable, but tiny scratches will become less visible over time with cleaning.
Why is there excessive smoking during broiling in my Haier Cookers oven?
Excessive smoking during broiling in your Haier Cookers oven may be due to the food being too close to the burner element. Lower the rack position of the food.
Why does my new Haier QSS740 Cookers oven cook differently than my old one?
Your new Haier Cookers oven may cook differently because it has a different cooking system than your old oven. For the first few uses, follow your recipe times and temperatures carefully and use rack positions recommended in the Cooking Guide. If you still think your new oven is too hot or too cold, you can adjust the temperature yourself to meet your specific cooking preference. See the Oven Controls section.
Why are there areas of discoloration on my Haier QSS740 cooktop?
Areas of discoloration on your Haier Cookers cooktop may be due to food spillovers not cleaned before the next use. See the Cleaning the glass cooktop section. Also, on models with light-colored cooktops, a hot surface may appear discolored; this is normal, temporary, and will disappear as the glass cools.
What causes frequent cycling off and on of surface units on Haier QSS740 Cookers?
Frequent cycling off and on of surface units on your Haier Cookers can be caused by improper cookware. Use only flat cookware to minimize cycling.
General| Model | QSS740 |
|---|---|
| Category | Cookers |
| Oven Type | Electric |
| Voltage | 220-240 V |
| Material | Stainless Steel |
| Frequency | 50-60 Hz |
| Features | Cooling fan |
To Next Page
