Light Switch
Instructions for installing and disassembling light canopy:
When disassembling, unplug the terminal at the back of
the light canopy, then remove the light canopy.
Rail
Terminal
Light Canopy
Ensure foods are dry before putting it into
the cooler for storage.
Do not store biological products, medicine and
flower which required specific temperature.
Food should stay 1-3cm away from the
back chamber for better air circulation
during storage.
Leave space in between food for better air
circulation.
The food should be sealed before putting
into the cooler to prevent the loss of
moisture and odour mixing.
Material of the packaging should be asepsis,
fragrance free, air proof and water proof.
The storage food should be classified
especially for cooked food. Meat and fish
should not be stored for too long to ensure
freshness.
Do take note on the food expiry date stated
on the product packaging to ensure safe
consumption.
Light canopy is optional. For installation process, please
refer to the instructions.
During the installation, insert light canopy to terminal on
top of the cabinet then connect with the plug at the back
of the light canopy.
The main switch for both light canopy and interior light
is located inside of the cooler on top right.
“I” indicates switch on; “O” indicates switch off.
Please cross check the switch status before use.
Light canopy and switch Food storage instructions
To Next Page
Loading...