Page 31
ENGLISH
WIRED CONTROLLER
49-5000680 Rev. 0
ECO
ECO function is default set to OFF. The default highest
temperature is 78°F in heating and the default lowest
temperature is 74°F in cooling/dry mode. It is default set to no
exceeding of limit. Four direction keys can move the cursor,
when the arrows ash, press ENTER key to stop the ashing and
press Left/Right key to adjust the value, then press the ENTER
key again to conrm. After setting ECO function, the temp.
adjustment will be limited. If overrun is set, the temp. can be
adjust out of ECO range in allowable time.
To Next Page
Loading...