26
Operation
(1) Long press MENU and keys for 5 seconds to enter
advanced settings. The unit number is displayed in the lower
right corner. Parameter is displayed in the upper left corner.
middle area displays function code. Press
or key to
switch to A38, and then press MENU key to enter parameter
adjustment, use
or key to adjust parameter to 1(turn on
low temperature dehumidication), then press MENU key to
conrm change.
At this time, you can exit the advanced settings by pressing
MODE key.
(2) After the low temperature dehumidication function is
turned on, the range of setting temperature in dry mode is
10°C~30°C.
(3) If you want to cancel this function, please change the
parameter of A38 to 0, then the range of setting temperature in
dry mode is 16°C~30°C.
Low temperature dehumidication
To Next Page
Loading...
