27
Operation
(1) Long press FAN key for 3 seconds to turn on light strip, the
middle area briey displays “PP” to indicate that the function is
set.
(2) If the function is turned on, long press FAN key for 3
seconds to turn o light strip, the middle area briey displays
“CC” to indicate that the function is o.
Light strip function (only valid for part of models)
(1) After the controller receives the command from the
centralized controller. It displays the icon. At this time, all
the keys except the ON/OFF key are invalid.
(2) After the controller receives the lock command, it displays
the icon. At this time, all keys are invalid.
(3) In central or lock state, backlight is valid, press any keys to
wake up screen.
Communication with central controller
To Next Page
Loading...
