Haier YR-E17A - Page 29

28
Operation
(1) This function is used to compensate for ambient
temperature. In the state of o󰀨, and the backlight is lit up,
long press FAN key for 5 seconds to enter temperature
compensation interface. You can adjust the parameters with
or key. After adjustment, you need to press MENU key to
conrm change.
(2) When it is Celsius, the range of parameter adjustment is -4
~ 4. When it is Fahrenheit, the range of parameter adjustment
is -8 ~ 8.
(3) This function is valid only during collecting ambient
temperature of wired controller.
Temperature compensation
(1) After controller is in cooling mode and is turned o󰀨, long
press ON/OFF key for 10 seconds to enter forced cooling
function. At this time, controller will be turned on, and “LL”
ashes in the middle area to indicate that the forced cooling
function is turned on.
(2) After controller is in heating mode and is turned o󰀨, long
press ON/OFF key for 10 seconds to enter forced heating
function. At this time, controller will be turned on, and “HH”
ashes in the middle area to indicate that the forced heating
function is turned on.
Forced Cooling/Heating