37
HAIKU
®
HOME ● WWW.HAIKUHOME.COM/SERVICE ● 1-855-MY-HAIKU
Slide the mounting ball (a) over the extension tube (b).
Insert the 6 mm steel pin (c) into the hole at the top of the extension tube, and then slide the mounting
ball upward, seating the steel pin in the inner slots.
Insert the wedge (d) into the mounting ball and secure it with the screw (e). Tighten the screw enough
to prevent movement between the mounting ball and extension tube, but do not overtighten.
7
6
8
STEPS COMPLETED
To Next Page
Loading...
