Haiku L3127-X5 - Attach Airfoils to Hub

19
HAIKU® HOME
Rest the motor assembly (a) on your lap. Moving clockwise, install each airfoil (b) with the provided hardware.
Tighten the screws to 2.5 N·m (22.1 in·lb). Do not use power tools to install the airfoils, and do not over-
tighten the screws! Over-tightening the screws may cause the airfoils to warp and may void your warranty.
Airfoil Hardware:
c. (6) M5 screws with tooth washer
STEP COMPLETED
Do not use power tools!