Haiku L3127-X5 - Plug Wiring Harnesses; Secure Extension Tube Bolts

23
HAIKU® HOME
Remove the tie holding the wiring harnesses to the extension tube. Plug the two large wiring harnesses
(a) into the receptacles on the motor. Plug the small, male wiring harness (b) into the female wiring
harness from the motor shaft.
Align the bolt holes on the extension tube with the holes on the motor shaft, and then secure the tube
with the provided hardware and wrenches.
Mounting Hardware:
c. M8 bolt
d. M8 washer
e. M8 nylock nut
To remove slack, gently tug on the cables at the top
of the extension tube.
STEP COMPLETED
2
1
3