29
HAIKU® HOME
Insert the steel pin (a) into the hole at the top of the extension tube, and then slide the mounting ball
upward, seating the steel pin in the inner slots of the ball.
Mounting Ball Hardware:
a. Steel pin
Insert the wedge (b) into the mounting ball as shown, and
then secure the wedge with the screw (c). Tighten the screw
enough to prevent movement between the mounting ball
and extension tube. Do not over-tighten the screw.
Mounting Ball Hardware:
b. Wedge
c. 4 mm self-tapping screw
STEP COMPLETED
2
1
To Next Page
Loading...
