Disconnect power to the fan location before installing the fan! Do not use the fan with a dimmer
switch!
If required by your local electrical code, a licensed electrician must install the fan.
The ground wire must be connected to the supply ground and its length must be longer than the
safety cable!
Technical Specifications
Check the fan label to make sure it is the correct voltage.
Model Operating voltage Diameter Weight Operating frequency
L3127-X5 120 VAC, 1 Φ 132 cm 5 kg 60 Hz
L3127-X6 220/240 VAC, 1 Φ 132 cm 5 kg
50/60 Hz
Tools Needed
• Ladder
• Wire Strippers
• Phillips Screwdriver (provided)
• Hex Key (provided)
• Wrenches (provided)
Box Contents
As you remove the fan from its packaging, make sure you are not missing any components required for
assembly and operation. If you ordered multiple fans, be sure to keep the components of each fan together!
!
!
!
To Next Page
Loading...
