hailea HC-1000A User Manual

CHILLER COOLER: Models HC-100 A; HC-150A; HC-300A; HC-500A; HC-1000A
PERFORMANCE
1) The scope of the pump must be chosen in relation to the filtering system.
2) The benefits listed in the table is calculated with a temperature of 30 °C, water of 28 °C and with a chilling
16 °C, while the volume of water to refrigerate is 100 lt for the HC-100A, 150 lt for the HC-150A, 300 lt for the
HC-300A, 500 lt for the HC-500A and 1000 lt for the HC-1000A. Of course for an aquarium with a water
capacity less than indicated, the time taken for cooling will be smaller.
3) The temperature reached by cooling is determined by the heating caused by accessories fitted into the
(heater, pump, lighting system, etc ...)
4) The refrigerator must be placed in a ventilated space and <b> not </ b> in support of the aquarium if it is
equipped with doors.
INSTALLATION
When you open the box checked that the product inside is intact with no damage caused by transport or by
accidental falls.
Check carefully that all the pieces needed to be in its machinery, if not talk to your dealer without starting the
installation with any other non-original.
A) contained in its products:
- COOLER
- USER'S EDUCATION
- N ° 4 Wheel CONNECTIONS WITH THE MACHINE FOR PIPES
- N ° 4 O-RING TO BE INSERTED IN CONNECTORS
- N ° 4 BANDS TUBE STOP
- N ° 1 FUSE SPARE (IN MODEL HC-1000A NOT 'NEED AS' THE CIRCUIT NOT NEED TO FUSE)
B) POSITION:
1) Do not install the condenser outside (see fig.1)

hailea HC-1000A Specifications

General

Brand	Hailea
Model	HC-1000A
Category	Freezer
Capacity	1000L
Water Cooled	Yes
Dimensions	1200 x 800 x 1000 mm
Voltage	220V

Summary

PERFORMANCE

INSTALLATION

B) POSITION

Guidelines for optimal placement of the refrigerator, focusing on ventilation and clearance.

C) TIPS FOR INSTALLATION

Recommendations for professional help, electrical connections, and safety checks during installation.

D) INSTALLATION METHOD

Procedure for connecting the inlet and outlet pipes and ensuring proper air circulation within cabinets.

PROGRAMMING

E) BEFORE YOU TURN THE CAR

Pre-operation checks including water level, pump function, and tube connections before starting.

A) TEMPERATURE VALUES

Details on how the LED indicator behaves when setting temperature values on the machine.

B) SETTING THE TEMPERATURE

Instructions for adjusting the desired refrigeration temperature using the 'SET' button.

C) AUTOMATIC PROTECTION

Explanation of the machine's built-in electrical protection and compressor restart delay.

D) SWITCH OFF AND AUTOMATIC

How the machine automatically shuts off when reaching set temperature and restarts on increase.

E) CAUTION

Warning about probe errors and instructions to contact a technician for repairs.

CARE AND MAINTENANCE

MONTHLY MAINTENANCE

Regular cleaning tasks including pipes, air filter, and display, with warnings against water immersion.

CLEANING THE FILTER

Step-by-step guide to disassembling, cleaning, and reassembling the unit's filter components.

SOLUTION TO SMALL PROBLEMS

Troubleshooting common issues like the refrigerator not working or switching on/off frequently.

SPARE PARTS

ELECTRICAL DIAGRAM

SAFETY AND SECURITY