hailea HC-150A - User Manual

CHILLER COOLER: Models HC-100 A; HC-150A; HC-300A; HC-500A; HC-1000A
PERFORMANCE
1) The scope of the pump must be chosen in relation to the filtering system.
2) The benefits listed in the table is calculated with a temperature of 30 °C, water of 28 °C and with a chilling
16 °C, while the volume of water to refrigerate is 100 lt for the HC-100A, 150 lt for the HC-150A, 300 lt for the
HC-300A, 500 lt for the HC-500A and 1000 lt for the HC-1000A. Of course for an aquarium with a water
capacity less than indicated, the time taken for cooling will be smaller.
3) The temperature reached by cooling is determined by the heating caused by accessories fitted into the
(heater, pump, lighting system, etc ...)
4) The refrigerator must be placed in a ventilated space and <b> not </ b> in support of the aquarium if it is
equipped with doors.
INSTALLATION
When you open the box checked that the product inside is intact with no damage caused by transport or by
accidental falls.
Check carefully that all the pieces needed to be in its machinery, if not talk to your dealer without starting the
installation with any other non-original.
A) contained in its products:
- COOLER
- USER'S EDUCATION
- N ° 4 Wheel CONNECTIONS WITH THE MACHINE FOR PIPES
- N ° 4 O-RING TO BE INSERTED IN CONNECTORS
- N ° 4 BANDS TUBE STOP
- N ° 1 FUSE SPARE (IN MODEL HC-1000A NOT 'NEED AS' THE CIRCUIT NOT NEED TO FUSE)
B) POSITION:
1) Do not install the condenser outside (see fig.1)

Summary

PERFORMANCE AND INSTALLATION OVERVIEW

Performance Characteristics

Details performance calculation factors and factors affecting cooling.

Placement & Positioning Guidelines

Advises on placement and specifies not to install the condenser outdoors.

Product Contents List

Lists all items included in the product packaging.

INSTALLATION PROCEDURES

Installation Advice and Tips

Recommendations for professional installation and electrical hookups.

Installation Method Details

Instructions for connecting pumps and ensuring air circulation in cabinets.

OPERATION AND PROGRAMMING

Pre-Operation Checks

Essential checks before powering on the unit, including water and tube connections.

Temperature Setting Procedure

Step-by-step guide for setting and confirming the desired water temperature.

Automatic Operation and Cautions

Explains automatic protection, temperature-dependent switching, and probe error warnings.

CARE, MAINTENANCE, AND TROUBLESHOOTING

Routine Maintenance Schedule

Guidelines for monthly cleaning and procedures for periods of non-use.

Filter Cleaning and Troubleshooting

Detailed filter cleaning instructions and solutions for common operational problems.

SPARE PARTS AND DIAGRAMS

HC-100 A Spare Parts Identification

Identifies and illustrates spare parts for the HC-100A model.

HC-150 A Spare Parts Identification

Identifies and illustrates spare parts for the HC-150A model.

HC-300 A;HC-500 A Spare Parts Identification

Identifies and illustrates spare parts for HC-300A and HC-500A models.

HC-1000 A Spare Parts Identification

Identifies and illustrates spare parts for the HC-1000A model.

Electrical Diagrams Overview

Provides electrical schematics and component labels for HC-100A, HC-150A, HC-300A, HC-500A models.

SAFETY AND COMPLIANCE

HC-1000 A Electrical Diagram

Electrical schematic and component labels for the HC-1000A model.

General Safety Precautions

Key safety advice, usage restrictions, and compliance standards for the unit.

hailea HC-150A Specifications

General

Brand	Hailea
Model	HC-150A
Category	Freezer
Cooling Type	Water Cooled
Internal Volume	150L
Power Supply	AC
Refrigerant	R134a
Voltage	220V
Frequency	50Hz
Water Cooled	Yes
Internal Dimensions (WxDxH)	500 x 500 x 600 mm