HAISEN HD06VCRH - User Manual

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Detection coverage
Typical installation height 15m
HD06VCRH
Haisen Technology | 01Specifications subject to change without notice.©All rights reserved.
Technical data
Dimensions (Unit: mm)
1. Automatic On/off control with
Daylight sensor.
2. Optional detection range, holdtime ,
daylight threshold,
Stand-by period
and
Stand-by dimming level.
3. Remote control setting.
4. 5 year limited warranty.
15m
10-15M
Highbay
altitude
Daylight
threshold
Stand-by
period
Stand-by
dimming level
Hold
time
Detection
area
On/off
control
Remote control
setting
5
years
2 3 4 5 623456
Ceiling Mounted
2
4
6
8
10
12
14
16
Mounting
height
Wall Mounted
2 4 6 8 10 18161412
1
2
3
4
1
2
3
4
CoveredWell covered
Mounting
height
Detection area
DIM 0-10V
0s/10s/30s/1min/5min/10min/30min/+∞
10%/20%/30%/50%
Max,ø14m/45.92ft (ceiling mounted)
15m/49.2ft (ceiling mounted)
Operating voltage
Operating current
Output
≤0.5WStand-by power
Hold time
Daylight threshold
Stand-by period
Stand-by dimming level
5750-5824MHz
<0.3mW
Microwave frequency
Microwave power
Mounting height
Detection range
0.5~1.5m/s
Operating temperature
IP rating
12VDC
30mA±5%
IP65
Motion detection
-20°C~+60°C
Warranty 5 years
2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
25%/50%/75%/100%
5s/30s/1min/3min/5min/10min/20min/30min
LED Driver
Red: 12V
Grey: GND
Purple: DIM
DIM GND 12V
ø50
50
24
12
22.5
Wiring diagram
Sensor

Summary

Sensor Features and Specifications

Automatic On;off Control

Features automatic on/off control with a daylight sensor for energy efficiency.

Optional Settings

Allows optional settings for detection range, holdtime, daylight threshold, standby period, and dimming level.

Remote Control and Warranty

Supports remote control settings and includes a 5-year limited warranty.

Technical Data and Dimensions

Technical Data Summary

Lists key technical specifications including operating voltage, current, output, and environmental ratings.

Dimension and Wiring Diagram

Provides product dimensions in millimeters and a wiring diagram for installation.

Detection Coverage and Installation

Coverage Diagrams

Illustrates detection coverage at a typical installation height of 15m for ceiling and wall mounting.

Installation Method

Details the step-by-step process for installing the sensor module.

Daylight Priority Function

Dusk;Dawn Sensor Functionality

Explains how Dual-PD technology differentiates light sources for automatic dusk/dawn sensing.

Daylight Priority Preconditions

Outlines the specific settings required for the daylight priority function to operate correctly.

Application Examples

Demonstrates how the sensor behaves under various ambient light and motion detection scenarios.

Operational Functions

Automatic ON;OFF Function

Describes automatic light activation upon motion detection and deactivation after people leave.

No Daylight Function

Explains operation when daylight threshold is disabled, focusing on motion and standby periods.

Dimmable Control;Corridor Function

Details how the light dims to a standby level after motion stops, then turns off.

Remote Control Operations

Remote Control Buttons

Explains the functions of buttons like ON/OFF, WM/PIR, Scene, Start, Memory, and Apply.

Parameter Settings

Defines settings such as Hold time, Stand-by period, Power %, Test (2s), Daylight Threshold, and Detection Range.

Installation Precautions and Environment

Installation Precautions

Provides essential guidelines for safe and effective sensor installation to avoid interference.

Application Environment

Specifies suitable and unsuitable environments for sensor installation to prevent false triggering.

User Notes

Offers important user considerations regarding microwave penetration, driver voltage, and testing.

Memory and Isolated Setting Modes

Memory & Apply Mode

Details how to save settings (Memory) and apply them to other sensors (Apply) for programming.

Isolated Setting Mode

Explains how to activate settings saved previously or factory defaults using the remote control.

FCC Compliance Information

FCC Statement

Details compliance with FCC rules, including conditions for operation and potential interference.

RF Exposure Evaluation

Confirms the device meets general RF exposure requirements for portable use.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The HAISEN HD06VCRH is a microwave sensor designed for automatic lighting control, offering a range of customizable features and robust performance. This sensor integrates a daylight sensor, allowing for intelligent on/off control based on ambient light conditions. It supports remote control settings, providing flexibility in configuration, and comes with a 5-year limited warranty, ensuring reliability and longevity.

Function Description:

The primary function of the HD06VCRH is to automatically turn lights on and off based on motion detection and ambient light levels. It utilizes a microwave module for motion sensing, which can be integrated into lighting fixtures. The sensor's dual-PD technology incorporates a dusk/dawn sensor that can differentiate between natural and LED light, ensuring lights are only off when genuinely not needed.

With its "Daylight Priority" function, the HD06VCRH can distinguish between artificial and natural light brightness after installation. It automatically turns off the light when the ambient brightness exceeds a preset lux level. This feature requires the standby period to be infinite, the standby dimming level to be set at 10%, 20%, or 30%, and the daylight threshold to be set at 30Lux, 50Lux, 80Lux, or 120Lux.

The sensor supports various operational modes:

• Automatic ON/OFF function: Lights turn on upon movement detection and turn off after people leave, suitable for corridors and staircases.
• No daylight function: When the daylight threshold is set to "Disable," lights turn on with movement and turn off after a standby period, ideal for dim places like basement parking or underpasses.
• Dimmable control/Corridor function: Upon motion detection, lights turn on to 100% brightness. After the last detection, if no motion is detected within the hold time, the light dims to a preset standby dimming level (10%, 20%, 30%, or 50%). After the standby period, the light turns off.

The device also includes a remote control (HD05R) for easy configuration. This remote allows users to:

• Turn the light on or off.
• Change between microwave sensor and PIR sensor functions (if applicable).
• Reset settings to initial defaults (100% detection range, 5s hold time, no standby time, daylight threshold disabled).
• Save and apply custom settings for detection range, hold time, standby dimming level, standby period, and daylight threshold.
• Test the sensor in a 2-second hold time mode for commissioning.
• Adjust parameters like detection area, hold time, power output (in 5% increments from 0% to 100%), daylight threshold, and standby dimming level.

Important Technical Specifications:

• Operating voltage: 12VDC
• Operating current: 30mA±5%
• Output: DIM 0-10V
• Stand-by power: <0.5W
• Detection area: 25%/50%/75%/100%
• Hold time: 5s/30s/1min/3min/5min/10min/20min/30min
• Daylight threshold: 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
• Stand-by period: 0s/10s/30s/1min/5min/10min/30min/+∞
• Stand-by dimming level: 10%/20%/30%/50%
• Microwave frequency: 5750-5824MHz
• Microwave power: <0.3mW
• Mounting height: 15m/49.2ft (ceiling mounted)
• Detection range: Max.Ø14m/45.92ft (ceiling mounted)
• Operating temperature: -20°C~+60°C
• Motion detection speed: 0.5~1.5m/s
• IP rating: IP65
• Warranty: 5 years

Usage Features:

• Remote Control Setting: All parameters, including detection range, hold time, daylight threshold, standby period, and standby dimming level, can be easily adjusted using the HD05R remote control.
• Plug & Play Design: The sensor module can be easily integrated into lighting fixtures. A cover with a humanoid icon indicates a built-in microwave module, while a plain cover indicates no sensor function. The bottom part of the sensor is designed to be always on the lighting fixtures, allowing for easy removal or placement of the module as needed without affecting the fixture's aesthetics.
• Installation Flexibility: The sensor can be installed in most lamps, provided they do not have a full metal shell that would shield the detection surface. The microwave module must be completely exposed, and its detection surface should face the detection area.
• Memory & Apply Mode: The remote allows users to save a set of parameters and then apply them to other sensors, streamlining the programming of multiple devices.
• Isolated Setting Mode: This mode allows for individual sensor configuration, activating saved or factory default settings.

Maintenance Features:

• Durable Design: With an IP65 rating, the sensor is protected against dust and water ingress, making it suitable for various indoor environments.
• 5-Year Warranty: A comprehensive 5-year limited warranty provides peace of mind regarding the product's reliability.
• Installation Precautions: To ensure optimal performance and longevity, the sensor should be installed by a qualified electrician with power off. It should be kept away from the driver to avoid interference and lamp flashing. Wiring must adhere strictly to the provided diagram to prevent short circuits.
• Application Environment Guidelines: The sensor is suitable for indoor installation to prevent false triggers from external factors like rain, wind, or tree swing. It should not be installed in places with all four metal shelters and small spaces (e.g., galvanized-iron roofs) or mounted in a way that causes false triggers due to lamp shaking or machine vibration.
• User Notes: Microwave signals can penetrate walls or glass thinner than 20cm but attenuate if thicker. The driver voltage should remain stable within 10%. Detection area is influenced by motion speed, mounting height, and movement volume. Testing should be conducted on sunny days without the lampshade to avoid affecting lux value readings.

HAISEN HD06VCRH Specifications