Need help?Do you have a question about the Haiwell HMI-C7H and is the answer not in the manual?
General| Display Size | 7 inch |
|---|---|
| Display Type | TFT LCD |
| Resolution | 800 x 480 pixels |
| Memory | 128MB |
| Communication Ports | 1 x RS232, 1 x RS485, 1 x Ethernet |
| Operating Voltage | 24 V DC |
| Humidity | 10% to 90% (non-condensing) |
| Protection Level | IP65 (front panel) |
| Touch Panel | 4-wire high-precision resistance network |
| Storage Temperature | -20~70℃ |
Covers notes, hardware installation, wiring, and network connection procedures for HMIs.
Guides users on selecting device models and configuring projects within the Haiwell SCADA software.
Describes how to access and navigate the HMI device manager interface for local control.
Explains the process of downloading projects to the HMI and running them automatically.
Explains how to use the cloud manager for remote HMI device management.
Covers essential device management tasks like downloading, uploading, and updating projects.
Details how to download projects to the HMI using USB drives or SD cards.
Outlines how to configure network connections for the HMI via Ethernet and Wi-Fi.
Details how to reboot the HMI and update its firmware using USB or SD card.
To Next Page
