Need help?Do you have a question about the Haiwell HMI-C7S and is the answer not in the manual?
General| Display Size | 7 inch |
|---|---|
| Resolution | 800 x 480 pixels |
| Processor | ARM Cortex-A8 600MHz |
| Communication Ports | 1xRS232, 1xRS485 |
| Protection Level | IP65 front panel |
| Mounting | Panel Mounting |
| Touch Type | Resistive |
| Memory | 128MB |
| USB Port | 1x USB Host 2.0 |
| Power Supply | 24V DC |
| Relative Humidity | 10% to 90% RH (non-condensing) |
| Flash Storage | 128MB Flash |
Overview of Haiwell HMI Embedded System, its functions, and technical characteristics.
Detailed specifications for various HMI models, covering display, memory, I/O, power, and environment.
Information on required Haiwell SCADA editing software and the Haiwell Cloud APP.
Visual representation of HMI ports and detailed pin definitions for various models.
Guide to HMI installation, hardware wiring, and network connection setup procedures.
Steps for selecting device models, downloading projects, and starting projects on the HMI.
Accessing the device manager and performing management tasks like download, upload, and updates.
Configuring project-specific parameters and download options for the HMI.
Configuring Ethernet, Wi-Fi, AP, 4G, and routing settings for HMI connectivity.
Configuring terminal name, code, time, security, cloud, and language settings.
Procedures for restarting the HMI device through background settings or device manager.
Instructions for updating HMI firmware using USB drives and SD cards.
Steps to bind the HMI device with a cloud account using a QR code for remote access.
Accessing and controlling the HMI remotely via a mobile phone application.
To Next Page
