Do you have a question about the Haiyang HD-77CF and is the answer not in the manual?
Turn off power immediately if smoke or burning occurs; call service.
Avoid opening cabinet; high voltage exists and can cause injury/death.
Do not touch back side of equipment due to harmful line voltage.
Avoid mechanical shock to display to prevent liquid leakage.
Ensure sufficient ventilation to prevent overheating and damage.
Mount on rigid frame/base to prevent loosening.
Use standard accessory pack materials for strength.
Operate within specified voltage; incorrect supply may cause issues.
High voltage retained in capacitors after power off.
Ensure main and system power switches are off before service.
Prevent ESD damage by static electricity.
Use correct transducer; check connection before power on.
Transducer must be installed by authorized personnel.
Product is an aid to navigation; use certified charts.
Device is an aid to navigation; use with other accuracy sources.
LCD contains liquid; flush skin/eyes immediately if broken.
Details about GPS status and satellite reception.
Use [WPT/MOB] to activate; [CANCEL] to disarm alarm.
Vessel position moves over a stationary map.
Displays sounder image with surface at top, bottom at lower part.
Magnifies sounder display from bottom towards surface.
Divides screen into two sections for fishfinder image.
Purpose and benefits of the Automatic Identification System.
Glossary of AIS system terms.
How to retrieve detailed information about AIS targets.
Find nearest services, ports by name, or ports by distance.
Manage waypoints, symbols, and save vessel position.
Create instant routes using waypoints.
Configure CPA, TCPA, and Radius alarms.
Select location for viewing, protection, and access.
Temporarily install bracket, then secure unit to surface.
Connect power cable to connector and battery terminals.
Introduction to satellite-based navigation.
Guidelines for optimal GPS antenna placement.
Requires planning and skill; read instructions before starting.
Secure through-hull transducer; install fairing blocks, aim, seal.
Loading...