Theme
V9’s VNC connection using “Simple Remote”
Models V9 series with a wireless LAN No. TI-M-1278 1/16
1. Outline
This document explains how to connect the V9 as an access point (with no encryption) to an
Android tablet (app: Simple Remote) by VNC. The V9 DHCP server feature is used to set the IP
address on your Android tablet.
2. Supported models
V9 series with a wireless LAN
3. Configuration of settings of the V9
3.1 Switching to the local mode screen
1 Press one corner of the screen for at least 2 seconds and release your finger when there
is a beep. Then press a different corner and hold for at least 2 seconds to display the
system menu.
*For V9 Standard panels, press [SYSTEM] to display the system menu.
Technical Information
July 2020
DHCP server function
This function allows the V9 as a server to reserve
some IP addresses in advance.
The V9 automatically assigns one of the available
IP addresses to the client device when the client
device accesses the V9 network.
To Next Page
Need help?
General
