Hakko Electronics Monitouch V9 Series Technical Information

Technical Information No. TI-M-1278 3/16
3 Click [Wireless Option]. Set [IP Address Setting] to “Manual/DHCP server”.
Configure “Start address”, “Maximum number of DHCP Users”, and “Lease time”.
Press [Apply].
3.3 The [User Settings] screen
How to add the access users of the VNC server is as follows.
1 Go to [User Settings] and click “Add”.
2 Specify “User Name”, “Password”, and “VNC Server“. Click ”Apply“.
E.g.)
Start address : 192.168.10.185
Maximum number of DHCP Users : 10
Lease time : 24 (h)
E.g.)
User Name : moni
Password : moni
VNC Server : Allow
Allow remote operation

Hakko Electronics Monitouch V9 Series Specifications

General

Brand	Hakko Electronics
Model	Monitouch V9 Series
Category	Monitor
Language	English