Need help?Do you have a question about the HAKO Hakomatic B45 CL DTC and is the answer not in the manual?
General| Model | Hakomatic B45 CL DTC |
|---|---|
| Category | Floor Machine |
| Area Coverage Theoretical | 1800 m²/h |
| Power Source | Battery |
| Battery Voltage | 24 V |
| Cleaning Width | 450 mm |
| Tank Capacity (solution/recovery) | 42 / 42 l |
| Tank Capacity | 42 l |
Defines the intended application of the machine and warns against improper use and liability.
Highlights risks associated with electronics, batteries, charging, and potential hazards like short circuits and explosions.
States the necessity of receiving initial instruction from a qualified person before operating the machine.
Details the procedure for fully charging the battery before first operation to ensure proper function and avoid damage.
Lists essential inspections before operation, including checking for leaks, installing components, and refilling tanks.
Outlines the sequence of steps for operating the machine, including brush and squeegee deployment and speed settings.
Explains how to interpret error codes displayed on the indicator field and when to contact service.
Describes the machine's primary function as a scrubber dryer and its main components like brush head and tanks.
Explains the purpose and function of various controls, buttons, and indicators on the machine's operating panel.
Provides a detailed visual guide to key operating elements and their specific functions on the machine.
Explains the benefits of Hako system maintenance and outlines customer responsibilities versus authorized service tasks.
Specific maintenance tasks and intervals for Hako System Maintenance I performed by authorized service centers.
Specific safety check procedures and intervals for Hako System Maintenance III/S performed by authorized service centers.
Details initial and subsequent battery charging procedures, including safety precautions and charger usage.
To Next Page