Need help?Do you have a question about the HAKO Sweepmaster B650 (6403.20) and is the answer not in the manual?
Defines the intended industrial/commercial use and limitations of the Sweepmaster.
Explains the meaning of various warning symbols used throughout the manual.
Lists essential checks to perform before starting the machine each day for safe operation.
Step-by-step instructions for starting and stopping the Sweepmaster P650 and B650.
Details the daily and weekly maintenance tasks to be performed by the machine operator.
Provides safety precautions before engine work and identifies key engine components.
Step-by-step guide for checking, refilling, and changing the engine oil.
Introduces the battery system for B650 and outlines safety precautions for handling batteries.
Details battery charging procedures, discharge indicators, and servicing notes.
Provides instructions for adjusting the tension of the drive belts for proper machine function.
Explains how to check side brush wear and readjust its height.
Details procedures for cleaning the brush space and changing the rotary brush.
Covers removing, emptying, inserting the dirt hopper, and changing its seals.
Instructions for clearing dust, removing, cleaning, and replacing the panel air filter and its seals.
General| Category | Floor Machine |
|---|---|
| Power Source | Battery |
| Brush Width | 650 mm |
| Voltage | 24 V |
| Drive | Electric |
| Model | Sweepmaster B650 |
| Working Width | 65 cm |
| Frequency | 50 Hz |
| Noise Level | 68 dB |
| Battery | 24V |
To Next Page