Need help?Do you have a question about the HAKO Scrubmaster B310 R CL/TB 1020 and is the answer not in the manual?
General| Model | Scrubmaster B310 R CL/TB 1020 |
|---|---|
| Category | Floor Machine |
| Working Width | 1020 mm |
| Battery Voltage | 36 V |
| Noise Level | 69 dB(A) |
| Solution tank | 310 liters |
| Type | Ride-on Scrubber-Dryer |
Welcomes the customer and emphasizes reading the manual.
Defines the machine's purpose and usage restrictions.
Outlines the terms and conditions of the warranty.
Details the procedure for inspecting and accepting the delivered machine.
Explains safety and warning symbols used in the manual.
Provides general safety and operational guidelines for the vehicle.
Details crucial information before and during vehicle operation.
Highlights the importance of maintenance and adherence to intervals.
Identifies specific risks associated with electronics and batteries.
Covers environmental care and disposal of cleaning agents and batteries.
Describes the location and importance of safety and warning labels.
Explains working width and basic operational controls like drive direction.
Provides information on fresh and waste water drainage procedures.
Covers operator training and the initial battery charging procedure.
Details essential checks before the first-time vehicle startup.
Explains how to adjust the driver's seat for comfort and reach.
Lists the checks to perform before the vehicle's daily operation.
Explains the fundamental working principles of the scrubber-drier.
Details the function of the pre-sweep and vacuum system.
Describes the scrubbing brushes and their operation.
Explains the function and maintenance of the squeegee.
Explains suction turbines and fresh/recovery water tanks.
Details the traction drive mechanism and the service/parking brakes.
Covers battery types, charging, and safety precautions.
Describes various optional accessories and their functions.
Details all controls and indicators within the driver's cabin.
Explains the functions of buttons and indicators on the operating panels.
Details controls on the right-hand panel, including lights and horn.
Identifies and describes key components located on the vehicle exterior/interior.
Step-by-step guide for starting, operating, stopping, and transporting the vehicle.
Lists dimensions, weights, technical specs, performance, and pre-sweep unit data.
Covers noise/vibration levels and order numbers for special equipment.
Emphasizes safety and general principles for maintenance tasks.
Outlines Hako system maintenance types, intervals, and customer tasks.
Provides a template for recording maintenance activities and dates.
Details daily and weekly maintenance tasks to be performed by the customer.
Outlines maintenance tasks required every 250 operating hours.
Outlines maintenance tasks required every 500 operating hours.
Details safety checks and regulatory compliance tasks every 1000 hours.
Covers servicing, charging, handling, and disposal of batteries.
Details procedures for filling, emptying, and cleaning the fresh water tank.
Outlines procedures for emptying and cleaning the recovery tank and related components.
Covers maintenance of brushes, squeegee, and related components.
Details maintenance procedures for the pre-sweep/vacuum system.
Covers checks and replacement of wheels.
Focuses on maintaining the vehicle's electrical components and troubleshooting.
Covers vehicle cleaning and guidelines for transport and towing.
To Next Page