HAKO Citymaster 1250 User Manual

Seite 1
Hako- Citymaster 1250
2.0.1 Maintenance
Contents, Maintenance
Inhalt/ Contents Seite/ Page
Maintenance plan 3 - 15
Check the engine oil and coolant levels (daily maintenance) 16- 18
Check the air filter soiling service indicator (daily maintenance) 19- 20
Drain any condansation from the water separator after 50 operation hours 21
Check the vacuum nozzle and circular brush settings (weekly maintenance) 22
Check the fresh water system (fresh water nozzles, nozzle filters, sieve filters weekly mainten.) 23
Grease the vehicle (weekly maintenance) 24- 26
Change the engine oil and engine filter after 50 and subsequently every 250 operating hours 27- 28
Change the fuel filter after 50 and subsequently every 500 operating hours 29- 30
Change the hydraulic oil return flow filter after 50 and subsequently every 500 operating hours 31
Check and adjusting the valve clearance on the Yanmar engine every 1000 operating hours 32
Change the membrane in the valve cover of the Yanmar engine every 1000 operating hours 33

HAKO Citymaster 1250 Specifications

General

Brand	HAKO
Model	Citymaster 1250
Category	Floor Machine
Language	English

Summary

Daily and Weekly Maintenance Procedures

Engine Oil and Coolant Level Checks

Procedure for checking engine oil and coolant levels, including safety precautions.

Air Filter Soiling Indicator and Filter Insert Checks

Checking the air filter maintenance indicator for contamination and filter insert procedures.

Water Separator Condensation Drainage

Sweeping System Checks and Adjustments

Weekly Lubrication Plan and Points

Maintenance at 50 Operating Hours

Engine Oil and Filter Replacement (50h)

Procedure for changing engine oil and filter after 50 and every 250 operating hours.

Fuel Filter Replacement (50h)

Procedure for changing the fuel filter after 50 and every 500 operating hours.

Hydraulic Oil Return Flow Filter Replacement (50h)

Changing the hydraulic oil return flow filter after 50 and every 500 operating hours.

Maintenance at 250 Operating Hours

Engine, Brakes, and Wheels Maintenance (250h)

Hydraulics, Steering, and Sweeping Systems Maintenance (250h)

Lubrication Service at 250-Hour Intervals

Maintenance at 500 Operating Hours

Engine and Hydraulics Maintenance (500h)

Maintenance at 1000 Operating Hours

Engine System Maintenance: Oil, Coolant, and Air Filters (1000h)

Exchange air filter safety cartridges, check coolant, and engine oil/filter checks.

Engine System Maintenance: Valve Clearance and Membrane (1000h)

Checking and adjusting valve clearance and changing the valve cover membrane.

Brake System Maintenance (1000h)

Hydraulics and Bowden Cables Maintenance (1000h)

Accelerator Pedal and Joint Maintenance (1000h)