HAKO Scrubmaster B45CL

Need help?

Do you have a question about the HAKO Scrubmaster B45CL and is the answer not in the manual?

Overview

Function Description
Usage Features
Maintenance Features
Daily Maintenance
Weekly Maintenance
Troubleshooting for Bad Cleaning Results

The Hako Scrubmaster B45CL is a floor cleaning machine designed for efficient and thorough cleaning operations. It is an automatic scrubber that utilizes brushes or pads, water, and cleaning agents to clean floor surfaces, followed by a squeegee system to collect the dirty water, leaving the floor dry.

Function Description:

The primary function of the Hako Scrubmaster B45CL is to clean various floor types in commercial and industrial settings. It operates by dispensing a cleaning solution, scrubbing the floor with a rotating brush or pad, and then vacuuming up the dirty water with a squeegee. This process ensures a clean and dry floor in a single pass. The machine is designed for ease of use and efficient operation, making it suitable for regular maintenance cleaning. It is important to note that the machine is not designed for coarse material and requires floor area sweeping beforehand. Only low-foaming cleaning agents suitable for automatic machines should be used.

Usage Features:

Operating the Hako Scrubmaster B45CL involves a series of straightforward steps:

Preparation: Before starting, disconnect the mains plug of the charger from the outlet and fasten it to holder 1.
Filling Water Tank: Fill the clear water tank by folding up the opening 2. The filling level can be controlled by the filling level indication 3.
Power On: Switch the machine on using the key switch 4. All aggregates will then be in standby mode.
Squeegee and Brush Head Lowering: Use lever 5 to lower the squeegee 14, and use pedal 6 to lower the brush head.
Driving and Speed Adjustment: Adjust the driving direction with switch 10 and control the speed with potentiometer 11.
Operation Activation: Pull the bail 7 of the bailsystem. This action switches on the brush head drive and the suction turbine.
Water Adjustment: Use switch 9 to adjust the water flow as necessary. It is crucial to ensure that a pad or brush is installed before operation. Only qualified persons are authorized to operate the machine.

Maintenance Features:

Regular maintenance is essential to ensure the longevity and optimal performance of the Hako Scrubmaster B45CL. Maintenance is divided into daily and weekly tasks.

Daily Maintenance:

Clear Water Tank: Empty the clear water tank by opening the fresh water filter covering 16. Check and clean the filter if required.
Soiled Water Tank: Empty the soiled water tank 12 via the soiled water drain hose 13. Clean the soiled water tank thoroughly.
Tank Lid and Sealing: Check and clean the tank lid and lid sealing 17.
Suction Filter: Check suction filter 15 in the soiled water tank and clean it if required.
Suction Hose: Remove suction hose 21 and clean it.
Squeegee: Remove squeegee 14 and clean it.
Brush/Pad Holder: Remove brush/pad holder 18 by keeping button 19 pressed, and then clean the brush/pad. Check the brush/pad for wear.
Battery Charging: Charge the battery by taking the plug from holder 1 and connecting it to an outlet.

Weekly Maintenance:

Brush Head/Sealing Strip: Check and clean the brush head/sealing strip 18.
Machine Exterior: Clean the machine from the outside.
Locking Caps O-ring: Grease the locking caps o-ring of the soiled water drain hose.
Squeegee Sealing Strips: Check the squeegee sealing strips and turn or replace them as needed.

Troubleshooting for Bad Cleaning Results:

If the cleaning result is unsatisfactory, check the following:

Blockages: The suction filter 15, suction hose 21, or squeegee 14 might be blocked.
Soiled Water Drain: The locking cap of the soiled water drain hose 13 might be open.
Soiled Water Tank: The soiled water tank might be full.
Tank Lid Sealing: The tank lid sealing 17 of the soiled water tank might be defective.

It is imperative to turn off the machine before performing any maintenance. For detailed information, users are advised to consult the instruction manual, which can also be accessed by scanning the provided QR code. Please pay attention to all information in the instruction manual.