HAKO Scrubmaster B45CL - Page 2

Hako Scrubmaster B45CL
MAINTENANCE AND CARE:
Daily maintenance:
 Empty clear water tank by opening the
fresh water filter covering 16. Check and
clean filter if required.
 Empty soiled water tank 12 by the soiled
water drain hose 13. Clean soiled water tank.
Check and clean tank lid and lid sealing 17.
 Check suction filter 15 in the soiled water
tank, clean if required.
 Remove suction hose 21 and clean it.
 Remove squeegee 14 and clean it.
 Remove brush / pad holder 18 by keeping
button 19 pressed and clean brush / pad.
Check brush / pad for wearing.
 Charge battery ( take plug from holder 1
and connect with outlet ).
Weekly maintenance:
 Check and clean brush head /
sealing strip 18
 Clean the machine from outside
 Grease locking caps o-ring of soiled water
drain hose
 Check squeegee sealing strips and turn or
replace them.
Cleaning result is bad:
o suction filter 15, suction hose 21 or
squeegee 14 is blocked.
o Locking cap of the soiled water drain hose
13 is open
o Soiled water tank is full
o Tank lid sealing 17 of the soiled water tank
is defect.
Turn off the machine before maintenance!
Please pay attention to the informations in the instruction
manual, you can find manual by reading QR-code.