EasyManua.ls Logo

Hallicrafters HT-44 User Manual

Hallicrafters HT-44
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
SUPPLEMENT
TO
OPERATION AND MAINTENANCE
MANUAL
HALLICRAFTERS
HT-44
WDØGOF 02/28/2019

Table of Contents

Other manuals for Hallicrafters HT-44

Question and Answer IconNeed help?

Do you have a question about the Hallicrafters HT-44 and is the answer not in the manual?

Hallicrafters HT-44 Specifications

General IconGeneral
BrandHallicrafters
ModelHT-44
CategoryTransmitter
LanguageEnglish

Summary

Hallicrafters HT-44 Manual Introduction

HT-44 Overview and Document Purpose

Provides background on the HT-44, its production, features, and the document's aim.

HT-44 Repair and Refurbishing Procedures

Test Equipment and Initial Setup

Lists required test equipment and initial considerations for repair.

Initial Power Up and Voltage Checks

Critical steps for powering up the unit and verifying voltages.

Oscillator System Testing and Alignment

Testing and aligning carrier, heterodyne, and VFO oscillators.

Mixer and IF Stage Alignment

Setup and alignment procedures for mixer and IF stages.

Driver/PA Alignment and Neutralization

Detailed alignment, neutralization, and band adjustments for driver/PA.

Modulation and Carrier Suppression Tests

Procedures for testing modulation and carrier suppression.

HT-44 Subsystem Adjustment and Troubleshooting

Microphone Audio System Setup and Tests

Adjustments and voltage/signal checks for the microphone audio system.

VOX System Testing and Measurements

Setup, testing, and signal/voltage measurements for the VOX system.

Anti-Trip Circuit Testing

Test procedures for the anti-trip subsystem.

Driver/PA Troubleshooting and Signal Levels

Troubleshooting driver/PA stages with static voltages and signal levels.

Final Operation Adjustments

Final bias and PA output adjustments before going on the air.

HT-44 Attachments and Data Sheets

Errata Sheet and Tube Matching Procedure

Errata information and procedures for matching final tubes.

Subsystem Data Sheets

Contains voltage and signal data for various subsystems.

Related product manuals