What to do if there is no sufficient injection from pin 7 V6 in Hallicrafters SR-150 Transceiver?
If the Hallicrafters Transceiver shows insufficient injection from pin 7 V6, verify pin 7 V6 for 25vpp of injection from carrier oscillator, and inspect V6 along with its related circuitry.
What to do if the injection level is too low at Bottom C64 in Hallicrafters Transceiver?
If the injection level is too low at the bottom of C64 in your Hallicrafters Transceiver, inspect the shielded wire, R91, and the grid circuit of V11.
How to troubleshoot low injection level at Pin 8 V11 on a Hallicrafters SR-150?
When the injection level is too low at Pin 8 V11 on your Hallicrafters Transceiver, check V11 and its associated circuitry.
General| Brand | Hallicrafters |
|---|---|
| Model | SR-150 |
| Category | Transceiver |
| Language | English |
To Next Page
