Hallowell HOME TEAM LOCKER - User Manual

HOME TEAM LOCKER
ASSEMBLY INSTRUCTIONS
General Instructions
1. Check material received against the packing list. Check the number of packages received and then check the
contents of each package.
2. Check the material received for damage. If damage has occurred, secure a “damage notation” from the carrier
3. Identify each part as it is unpacked and put like parts together as close as possible to the working area where they are
to be assembled.
4. Be careful to use the correct hardware as specified in the assembly instructions.
CAUTION
In the interest of safety, all lockers must be securely anchored to the floor and/or wall. For safety, handle all components
carefully and wear work gloves when assembling lockers. Install all units plumb and tighten all hardware securely. Retain
instructions for future reference.
866-566-0500
info@Hallowell-List.com
www.Hallowell-List.com

Summary

Assembly General Instructions

Assembly Safety Caution

Emphasizes secure anchoring, careful handling, and use of work gloves during assembly for safety.

Package Contents

Part Identification

Lists and illustrates all parts included in the package with their respective part numbers and quantities.

Assembly Step 1 & 2

Step 1: Assemble Base Structure

Instructions to lay the rear panel and bolt side panels to form the initial locker structure.

Step 2: Attach Top Panel

Instructions to bolt the top panel to the outside of the rear and side panels.

Assembly Step 3 & 4

Step 3: Install Bottom and Shelf

Instructions to bolt the bottom panel and hat shelf to the inside of the rear and side panels.

Step 4: Attach Front Frame

Instructions to bolt the front frame assembly to the sides, top, and bottom of the unit.

Hallowell HOME TEAM LOCKER Specifications

General

Brand	Hallowell
Model	HOME TEAM LOCKER
Category	Indoor Furnishing
Language	English