Hallowell Kid Locker - User Manual

To Next Page

KID LOCKERS

INSTALLATION INSTRUCTIONS

General Instructions

1. Check material received against the packing list. Check the number of packages

received and then check the contents of each package.

2. Check the material received for damage. If damage has occurred, secure a

“damage notation” from the carrier

3. Identify each part as it is unpacked and put like parts together as close as possible

to the working area where they are to be assembled.

4. Be careful to use the correct hardware as specified in the assembly instructions.

CAUTION

In the interest of safety, all lockers must be securely anchored to the floor and/or wall.

For safety, handle all components carefully and wear work gloves when assembling

lockers. Install all units plumb and tighten all hardware securely. Retain instructions for

future reference.

866-566-0500

info@Hallowell-List.com

www.Hallowell-List.com

Need help?

Do you have a question about the Hallowell Kid Locker and is the answer not in the manual?

Summary

Bolt side panels to the inside of the rear panel using specified hardware.

Bolt the top panel to the outside of the side and rear panels.

Bolt the bottom panel to the inside of the rear and side panels.

Insert and bolt the legs into the openings at the bottom of the locker.

Place the frame assembly on the locker and bolt it to the top, sides, and bottom.

General