Hallowell Kid Locker - Assembly Steps; Attach Side Panels to Rear Panel; Attach Top Panel; Attach Bottom Panel

NOTE: FINGER TIGHTEN ALL NUTS, ENSURE UNIT IS SQUARE, THEN TIGHTEN ALL.
2) Bolt Top (3)
to the outside
of the side and
rear panels.
4) Insert Legs (6)
and bolt them
into the
openings
located at the
bottom of the
locker.
6
1) Bolt Side
panels (4) to
the inside of
the rear panel
(2).
3) Bolt Bottom
(5) to the insde
of rear and
side panels.
5) Place the
Frame (1) on
the locker and
bolt it on to
top, side,
bottom and
top.
4
4
2
3
5
1
PG. 2