What to do if LAN and 2.5G indicators are not on HALNy Network Router?
If the LAN and 2.5G indicators are off on your HALNy Network Router, first ensure that your PC NIC is enabled. Then, verify you are using the network cables included in the device package and that the network cable connection is normal. Check if the LED for your corresponding LAN or 2.5G port is on, and finally, confirm that the network adapter is working properly.
How to troubleshoot POWER indicator not on HALNy Network Router?
If the POWER indicator is not on for your HALNy Network Router, check whether the power connection is correct. Also, verify that the power adapter matches the device.
Why is the PON indicator not on HALNy GPON ONT HL-4BX3V-F?
If the PON indicator is not on your HALNy Network Router, check whether the SN of ONU matches OLT. You should also check whether the optical attenuation is in the normal range.
What to check if LOS indicator is not on HALNy Network Router?
If the LOS indicator is not on for your HALNy Network Router, ensure the optical fiber cable is properly inserted. Also, check whether the optical fiber connector is clean.
General| Device Type | GPON ONT |
|---|---|
| Model | HL-4BX3V-F |
| WAN Interface | GPON |
| GPON Interface | SC/APC |
| Wavelength | Tx 1310 nm, Rx 1490 nm |
| Optical Power Budget | 28 dB |
| Power Supply | 12V DC, 1A |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Wi-Fi | 802.11b/g/n/ac |
| Humidity | 10% to 90% non-condensing |
To Next Page
