HALNy HLE-3GM - Troubleshooting; Technical Specification

HALNy HLE-3GM Quick Installation Guide
6
the power adapter. Insert the other end of the power cord into the power socket,
⚫ Check whether the Power indicator is on. If it is on, the power supply is normal.
Otherwise, check whether the power cord and the power adapter are correctly
connected.
4 Troubleshooting
Symptom
Solution
The LED indicator is
not on
 Check whether the power connection is correct,
 Check whether the power adapter matches the
device.
The LED indicator is
red
 Check whether your Service Provider have network
problems,
 Check whether the network cable is properly
connected to WAN port
5 Technical Specification
Main Technical Specifications
Standard
Ethernet
1000BASE-T
Rate
Uplink
1Gbps
Downlink
1Gbps
Interface
WAN interface
RJ-45 10/100/1000Mbps MDI/MDIX Self adaption
3 LAN ports
RJ-45 10/100/1000Mbps MDI/MDIX Self adaption
WiFi 2.4Ghz
WiFi 5Ghz
802.11n (2T2R MIMO) 300Mbps
802.11ac (2T2R MIMO) 876Mbps
Physical Characteristics and Environment Requirements
Power adapter input
100V～240V AC，50Hz～60Hz
Whole-device power supply
12V DC，1A
Standard power consumption
<12W