To Next PageTo Next Page
Need help?Do you have a question about the Halo2Cloud Pocket Power 3000 and is the answer not in the manual?
Identifies the power button, LED indicators, input/output ports, and USB cable.
Lists the items included in the package: charger, cable, pouch, and instructions.
Basic steps to determine charger charge level and initial charging guidance.
Instructions for manual power control and automatic on/off features.
Procedure for recharging the HALO charger using a computer or AC adapter.
How to use the HALO charger's output port to charge other electronic devices.
Explanation of the charger's intelligent system for device compatibility.
Illustrates recharging the HALO charger via a computer USB port.
Shows how to charge Micro USB devices using the charger's output port.
Recommendations for proper storage, avoiding moisture and extreme temperatures.
Important safety warnings regarding battery handling, misuse, and heat exposure.
Additional warnings against disassembly, impacts, moisture, and inserting objects.
Details battery cell type, capacity, input/output voltage, and dimensions.
Information regarding FCC rules, interference, and compliance measures.
Details what the warranty covers, duration, and exclusions.
Instructions on how to get service, including RMA and return procedures.
Defines the extent of HALO's liability and warranty limitations.
Provides email and phone number for support and company address.
States HALO's registered trademark and design origin.
The HALO Pocket Power 3000 is a universal power charger designed to provide portable power for a variety of electronic devices. Its primary function is to charge mobile phones, tablets, and other compatible gadgets, ensuring users have power on the go. The device is equipped with a lithium-ion rechargeable battery, offering a safe and dependable source of portable power when used correctly.
The HALO Pocket Power 3000 is designed for ease of use, featuring a simple power button for turning the device ON/OFF. To turn it on, users simply press the power button, and LED lights on the side of the charger will illuminate, indicating that the device is active. To turn it off, the power button should be pressed and held for three seconds. The charger also boasts an auto on/off feature, which means it will automatically turn on and begin charging when an electronic device is plugged in. Conversely, it will automatically shut off after 30 seconds of inactivity, helping to conserve battery life.
Checking the HALO charger's battery level is straightforward. A quick press and release of the power button will display the current charge status through a series of LED battery indicator lights. Four solid blue lights signify that the charger is fully charged, while fewer solid lights indicate a lower charge. Specifically, one solid light means 0%-25% charge, two solid lights indicate 26%-50%, three solid lights show 51%-75%, and four solid lights mean 76%-100% charge.
When the HALO charger itself is being recharged, the LED battery indicator lights provide a visual cue of the charging progress. A blinking first light indicates 0%-25% charge. As charging progresses, the first light becomes solid and the second light blinks for 26%-50% charge. When the first two lights are solid and the third light blinks, the charge is between 51%-75%. With the first three lights solid and the fourth light blinking, the charge is 76%-99%. Finally, all four lights solid confirm that the HALO charger is 100% fully charged.
Recharging the HALO Pocket Power 3000 is done using the provided Standard USB to Micro USB cable. The Micro USB tip plugs into the charger's 5V/1A Micro Input port, while the Standard USB end connects to a computer's USB port or an AC wall adapter that accepts a Standard USB connection. The charger will automatically begin charging and should be charged for a full six hours to reach full capacity.
To charge an electronic device, users can utilize the 5V/1A Output port. For devices with a Micro USB port, the Micro USB tip of the provided cable plugs into the electronic device, and the Standard USB end plugs into the HALO charger's 5V/1A Output port. The HALO charger is also compatible with the charging cable supplied with the personal electronic device. In this case, the Standard USB end of the device's cable plugs directly into the HALO charger's 5V/1A USB output port.
The HALO charger incorporates an intelligent recognition system, which enhances compatibility for charging various mobile phones. If a connected mobile phone does not charge, restarting the HALO charger is recommended. The device is broadly compatible with a wide range of electronics, including mobile phones, tablets, PSP, NDS, MP3, MP4, MP5 players, Bluetooth devices, GPS units, and cameras. It's important to note that the HALO charger can also be used with the original charging cable provided with the user's personal electronic device.
Proper storage and handling are crucial for maintaining the HALO Pocket Power 3000. Users should avoid getting the charger wet or storing it in extreme temperature conditions. The device is not designed for user disassembly or repair, and any attempts to do so may result in damage or safety hazards.
For cleaning the exterior of the HALO charger, a soft cloth with soap is recommended. It is important not to use liquid detergent or any chemicals, as these could potentially damage the device.
Safety precautions are emphasized to ensure personal safety and the longevity of the HALO charger. The device is manufactured with safety in mind, and users are advised to read the operating instructions carefully. Incorrect operation or incompatibility with personal electronic devices could lead to reduced battery performance or damage.
The lithium-ion rechargeable battery within the device presents a risk of fire or chemical burn if mistreated. Therefore, users must not disassemble, expose the charger to heat above 212°F (100°C), or incinerate it. Misusing or incorrectly connecting the HALO charger could cause electric shock or damage to equipment. During extended high-power operation, the charger may become warm, so it should be kept away from materials that could be affected by these temperatures.
When used correctly, the lithium-ion batteries are a safe power source. However, misuse or abuse, such as leakage, burns, fire, or explosion, can cause personal injury or damage to other devices. Users should never drop the charger or subject it to strong impacts, and it should not be operated if it has received a sharp blow or is otherwise damaged. Exposure to moisture, water, rain, or snow should also be avoided.
Inserting any object into the ports or openings of the HALO charger is strictly prohibited. The charger should never be left unattended while charging. There is a risk of batteries exploding, overheating, or igniting, so users must not disassemble, modify, heat, or short-circuit the batteries. The device should not be placed in fire or hot places, nor exposed to direct sunlight. Charging should only be done using the specified method and USB cable. In the rare event of leakage or explosion, sand or a chemical fire extinguisher should be used. Finally, batteries should be recycled or disposed of according to state and local guidelines.
General| Battery Capacity | 3000mAh |
|---|---|
| Capacity | 3000mAh |
| Output | 5V/1A |
| Input | 5V/1A |
| Charging Time | 3-4 hours |
| Battery Type | Lithium-ion |
