To Next PageTo Next Page
Need help?Do you have a question about the Halsey Taylor HydroBoost HTHBHVR8 and is the answer not in the manual?
Indoor application only, service by authorized personnel.
List of tools not provided for installation.
Electrical grounding advisory and GFCI protection suggestions.
Disconnect power before servicing; unit pictured without bottle filler.
Detailed dimensions and legend for unit installation.
Detailed steps for installing the bottle filler onto the water cooler.
Instructions for connecting and disconnecting water lines using quick fittings.
Steps for safely removing the bottle filler unit for maintenance.
Procedure to check the software designation (BF9).
Instructions on locating and accessing the programming button.
How to reset the visual filter monitor indicator.
Configure unit type (Refrigerated or Non-Refrigerated).
Procedure to reset the bottle count display.
Procedure to verify software designation (BF11 or BF12).
Adjust the range sensitivity for the IR sensor.
Configure unit type (Refrigerated/Non-Refrigerated).
Procedure to reset the bottle count display.
Select the desired filter capacity (3000GAL or 6000GAL).
List of replacement parts for 115V units.
List of specific replacement part kits for bottle fillers.
List of replacement parts for 220V/240V units.
Diagrams illustrating 115V and 220V/240V wiring configurations.
General| Material | Stainless Steel |
|---|---|
| Filtration | Optional |
| Mounting Location | Wall-Mounted |
| Voltage | 115V |
| Type | Bottle Filling Station |
| Water Source | Plumbed |
| Activation | Sensor-Activated |
| Power Consumption | 370 watts |
| Drain Connection | 1-1/4 inch tube outlet |
| Inlet Connection | 1/4" O.D. tubing |
