To Next PageTo Next Page
Need help?Do you have a question about the halstrup-walcher PU10 and is the answer not in the manual?
General| Type | Pressure Transducer |
|---|---|
| Process connection | G1/4" male |
| Operating temperature | -10...+60 °C |
| Protection class | IP65 |
| Output signal | 4...20 mA |
| Supply voltage | 10 ... 30 V DC |
| Electrical connection | M12 connector |
| Process connection type | Thread |
Guidelines for proper usage and limitations of the differential pressure transducers.
Covers safe handling during shipping, assembly, electrical connections, and initial operation.
Details procedures for error reporting, service, maintenance, and end-of-life disposal.
Explains symbols indicating potential hazards (bodily injury, property damage) and important information.
Describes the PU/PI and PS10 transducers as pneumatic, electronic sensors for pressure measurements.
Provides guidance on initiating the operation of the pressure transducers.
Highlights transducer robustness, precision, handling care, and optimal mounting recommendations.
Illustrates terminal connections for AC and DC supply voltages to the instrument.
Details terminal connections for various analog output signals (voltage and current).
Guides on calibrating the zero point after the transducer has warmed up, using the P0 trimmer.
Provides common error descriptions, potential causes, and corrective actions for transducer issues.
Lists comprehensive technical specifications including measurement ranges, overload, hysteresis, and ambient conditions.
Details electrical specifications (power, voltage, load) and output signal options.
Covers pressure port size, electrical connections, mounting, dimensions, and protection class.
Lists materials used for parts that come into contact with the measurement medium.
Presents detailed dimensional drawings for standard and LCD versions of the PU/PI/PS10 transducers.
