Need help?Do you have a question about the Haltech NEXUS R5 and is the answer not in the manual?
General| Product Category | Engine Management System |
|---|---|
| Analog Inputs | 8 |
| Ignition Outputs | 4 |
| Drive-By-Wire Throttle Control | Yes |
| Knock Control | Yes |
| Data Logging | Yes |
| Onboard Wideband Controller | Yes |
| Memory | 512 MB |
| PWM Outputs | 8 |
| Injection Outputs | 4 |
| Communication Protocols | CAN |
| Processor | 32 bit |
| Operating Voltage | 8-16V |
| Operating Temperature | -40°C to 85°C |
Core definition of the Haltech NEXUS R5 product.
Definition of the term NEX-US as used in the product name.
Steps to install the Haltech NSP software on a PC.
Procedure for connecting the NEXUS R5 to a PC via USB.
Instructions for connecting the main power supply to the NEXUS R5.
Details of the limited warranty coverage for Haltech products.
Policy and procedures for returning Haltech products.
Specific terms for returning items with opened or intact sealed packaging.
Installer responsibilities and safety precautions during product installation.
Guidelines on the intended off-road/competition use of Haltech products.
To Next Page
