Need help?Do you have a question about the Haltech ic-7 and is the answer not in the manual?
General| Resolution | 800 x 480 pixels |
|---|---|
| Display Type | TFT LCD |
| CAN Communication | Yes |
| Touchscreen | Yes |
| Compatibility | Compatible with Haltech ECUs |
| Display Size | 7 inch |
| Brightness | 1000 nits |
| Operating Temperature | -20°C to 70°C |
Lists the contents included with the Haltech IC-7 Display Dash.
Describes optional mounting brackets for the IC-7 Display Dash.
Identifies and labels the components on the front of the IC-7 Display Dash.
Identifies and labels the connectors and mounting points on the rear of the IC-7 Display Dash.
Explains how to navigate through the different screens using the dash buttons.
Details how to adjust the display brightness using manual controls and ambient light sensor.
Explains the function and configuration of the shift/alarm light panel.
Provides step-by-step instructions for the initial startup of the IC-7 Display Dash.
Explains the features and capabilities of the Haltech IC-7 software.
Guides the user through the process of installing the Haltech IC-7 software.
Illustrates how to connect the IC-7 Display Dash to a Haltech CAN bus system.
Shows how to connect the IC-7 Display Dash to Haltech Elite ECUs via DTM-4 cable.
Details the pinout and connections for the DTM-4 receptacle.
Details the pinout and connections for the 34-pin Superseal connector.
Explains how to connect the IC-7 Display Dash to Haltech Platinum Series ECUs.
To Next Page
