5
Note – Manual search
• The manual search is automatically aborted after 7 minutes.
• Using the RCC button (10) frequently will drain the battery. We recommend
only using this function to seek out an optimal location for the device.
Note – DCF signal
•When not in use, the DCF signal can be switched off by pressing and
holding the +/RCC button (10) for approximately 3 seconds.
Note – Summer time
•The clock automatically switches to summer time. DST (6) appears on the
display as long as summer time is activated.
5.2 Manually setting the date/time
•Press and hold the MODE button (9) for approximately 3 seconds until the
hours display begins to ash.
•Set the following information in the order listed:
•Time zone (+12/-12), Hours, Minutes, Year, Month, Day, Language
•To select the individual values, press the +/RCC button (10) or the -/°C/°F
button (11), and conrm each selection by pressing the MODE button (9).
•Press the MODE button (9) immediately to adopt the set value displayed
and skip ahead.
•If you do not make an entry for 20 seconds, you automatically exit the
setting mode.
To Next Page
Loading...
Need help?
General
