Hama DR350 - Time Settings; Lighting

10
To change the equaliser settings, proceed as follows:
• Press [ ]and open “System settings”.
• Select the “Equaliser” menu item and conrm the
selection by pressing [VOLUME/SELECT/NAVIGATE].
• Turn [VOLUME/SELECT/NAVIGATE]toselect one of
the precongured proles. If playback is already started
when you modify these settings, you can hear the
changes in the audio immediately.
• Conrm the setting by pressing [VOLUME/SELECT/
NAVIGATE].
My EQ
• Press [
]and open “System settings”.
• Select the “My EQ setting” menu item and conrm the
selection by pressing [VOLUME/SELECT/NAVIGATE].
• Hereyou can congurethe settings for the bass and
treble frequencies of the audio.
• Turn [VOLUME/SELECT/NAVIGATE]tothe left or right
to change avalue. If music is playing while you modify
these settings, you will hear the changes in the audio
immediately.
• When you have nished conguring the settings, press
[VOLUME/SELECT/NAVIGATE].
• Press [
]tosave the settings for the “My EQ” prole.
• To use the newly created prole, select the “My EQ”
option and conrm by pressing [VOLUME/SELECT/
NAVIGATE].
14.2 Time settings
• Press [
]and open “System settings”.
• Select the “Clock” menu item and conrm the selection
by pressing [VOLUME/SELECT/NAVIGATE].
Time and date settings
• Turn [VOLUME/SELECT/NAVIGATE]toset the time and
date digit by digit.
• Press [VOLUME/SELECT/NAVIGATE]toconrm the
setting of each digit and move to the next.
• Press [
]tosave the settings.
Updating
If automatic time and date adjustment is activated, the
device receives time and date information from the station
over the FM/DAB/DAB+ radio network. This is the best way
to ensurethat the clock will run accurately and the alarm
will trigger at the correct time, even after power outages.
From ALL –Time information is retrieved from all
available sources.
From digital radio –Timeinformation is retrieved only
from DABstations.
From FM –Timeinformation is retrieved only from the
analogue radio network.
No updating –Notime information is retrieved (manual
updating).
Format
Choose between 12-hour and 24-hour time formats.
Date format
Choose between DD-MM-YYYY and MM-DD-YYYY date
formats.
14.3 Lighting
The backlight can be congured separately for each
operating mode (playback mode, standby mode and
snooze mode).
Proceed as follows:
• Press [
]and open “System settings”.
• Select the “Lighting” menu item and conrm the
selection by pressing [VOLUME/SELECT/NAVIGATE].