•Donot open the device or continue to
operate it if it becomes damaged.
•Donot modify the product in any way.
Doing so voids the warranty.
4. System Requirements
The SeleFun 70 BT supports Bluetooth-
capable terminaldevicessuch as smartphones
and tablet PCs thatuse the iOS 5orAndroid
3.0 (ornewer) operating systems.
Note
•Note that some terminal devices
may not support this product.
•Please refer to the operating
instructions for the device you
areusing.
5. Getting Started
Warning –Battery
•Use only asuitable charger when
charging the battery.Follow the
charger’soperating instructions!
•Donot overcharge the product or
allow the battery to completely
discharge.
•Avoid storing, charging or using
batteries in extreme temperatures.
•When stored over along period of
time, batteries should be charged
regularly (at least every three
months).
•The product is equipped with abuilt-in
battery.
•Charge the battery fully beforeusing
the device for the rst time.
•Tocharge the battery,use the included
USB charging cable to connect the
MicroUSB charging port on the
product (1) to aUSB charger or the USB
port of your notebook/computer (must
be switched on).
•The status LED (2) illuminates redwhile
the battery is charging and switches
off once the battery is fully charged.
If the battery is dead, the status LED
(2) goes out.
Warning –Charging
•Asarule, do not charge devices or
USB connections that aredefective
and do not try to repair them yourself.
3
To Next Page
Loading...
