Hama Looptastic - Troubleshooting; Problem Resolution Guide

13
7.8 Troubleshooting
Problem Possible cause Solution
The drone stops for no apparent
reason and/or does not launch.
The battery of the drone is weak or
empty.
Fully charge the battery of the
drone.
The batteries of the remote control
areweak or empty.
Check the batteries of the remote
control and replace them with new
batteries if necessary.
The rotors of the drone do not move.
The drone’sbattery is not correctly
connected to the drone.
Check the plug-in connection of the
battery and the drone.
The battery of the drone is weak or
empty.
Fully charge the battery of the
drone.
The batteries of the remote control
areweak or empty.
Check the batteries of the remote
control and replace them with new
batteries if necessary.
The drone rotates only around its
vertical axis, overturns or does not
launch.
The propellers of the drone are
damaged or incorrectly arranged.
Check the propellers. Check the
arrangement of the propellers and, if
necessary,attach them as described
in Section 7.6 Changing the rotor
blades.
The drone pulls strongly in a
particular direction.
The drone is not properly aligned.
Carry out tweaking as described in
Section 7.3 Tweaking the control
(trimming).
The drone won’t perform loops. The battery charge is too low.
Fully charge the battery of the
drone.