3
•Donot attempt to service or repair the product yourself.Leave any and all service
work to qualied experts.
•Donot modify the product in any way.Doing so voids the warranty.
•Keep the packaging material out of the reach of children due to the risk of
suffocation.
•Dispose of packaging material immediately according to locally applicable
regulations.
Warning –Batteries
•Immediately remove and dispose of dead batteries from the product.
•Only use batteries (or rechargeable batteries) that match the specied type.
•When inserting batteries, note the correct polarity (+ and -markings) and insert
the batteries accordingly.Failure to do so could result in the batteries leaking
or exploding.
•Donot overcharge batteries.
•Keep batteries out of the reach of children.
•Donot short circuit the batteries/rechargeable batteries and keep them away
from uncoated metal objects.
4. Getting Started
Open the battery compartment cover (12), remove the contact breaker and then
close the battery compartment cover again.
5. Operation
5.1 Automatic time setting using the DCF signal
•Once you have removed the contact breaker,anacoustic signal sounds and the
alarm clock automatically starts searching for aDCF signal. During the search, the
radio icon
(2) will ash.
•After 5-10 minutes (depending on how quickly the radio signal is received), the
clock sets itself to the correct time.
•When the wireless signal is received, the date, time, weekday and temperatureare
automatically set and the radio icon (2) is displayed.
•Ifthe clock is unable to receive atime signal wirelessly,the time/weekday/
temperatureare displayed and the radio icon (2) is not visible. In this case, you
can set the time manually.
To Next Page
Loading...
Need help?
General
