Hama SIRIUM2000AMBT User Manual

9
10.3 Playback from atablet /smartphone
To access one of the existing network shared les directly
from the loudspeaker,proceed as follows:
• Open the Hama Smart Audio App and select the required
loudspeaker.
• This takes you to the playback screen and the associated
source selection in the footer.
• Touch [Sources] and then [Local content].
The memory in your smartphone /tablet is automatically
searched and tracks found aregrouped by category
(Albums, Artists, Country,Folder).
Select acategory and the required track.
11. Alexa function (voice control)
• After saying the activation word("Alexa") or pressing the
[Action]button (4), the status LED lights up blue and
asignal tone sounds. Youcan now talktoAlexa.
• While Alexa is answering, the status LED ashes blue.
Note
• If the Amazon Market App has already been installed
and set up on your smartphone, some smartphones
will take the user data directly from the App.
• To set up anew Amazon account, log out and repeat
the steps described in this section.
Note -Alexa Push to Talk /function key
• Brieypress the [Action] button (4) on the
loudspeaker to activate Alexa during audio mode or
higher volume. Alternatively,press the [Action] button
(3) on the remote control.
• Press the [Microphone Mute] button (3) to switch the
microphone off.Ifthe microphones aredeactivated,
the status LEDs (1-5) light up solid red. Alternatively,
press the [Microphone Mute] button (4) on the remote
control
• The loudspeaker will now no longer respond to the
activation worduntil the microphones arereactivated.
• Press the [Microphone Mute] button (3) again to
reactivate the microphone. Alternatively,press the
[Microphone Mute] button (4) on the remote control.
The status LEDs (1-5) go out.
12. Equaliser profiles
The equaliser allows you to adjust the sound of the
loudspeaker to your preferences by altering the bass intensity .
Youcan choose from aprecongured prole or create your
own custom prole.
• Press [EQ1] (9) on the remote control to call up the
pre-congured prole.
To create acustom prole, proceed as follows:
• Press [EQ2] (11) on the remote control to start the
conguration process.
• Change the bass intensity (5/6) on the remote control.
If playback is already started when you modify these
settings, you can hear the changes in the audio
immediately.
• Conrm your settings by pressing [EQ2] again.
Conguration can also be carried out via the App.

Hama SIRIUM2000AMBT Specifications

General

Brand	Hama
Model	SIRIUM2000AMBT
Category	Speakers
Language	English