With the Ultimate Adapter you can connect a PS/2 keyboard and PS/2 mouse usual in trade to
your Xbox
®
. The result is a considerably improved control as far as First-Person-Shooters (3D-
Shooters, Egoshooters) are concerned. This also applies to other games which require particu-
larly aiming and a more precise control.
Of course, the button occupancies can be adapted to your demands so that you can adjust any
game title to your game habits. The programming of the buttons is really easy. In addition, the
settings of the deadzone / quiet zone e.g. can be refined and adjusted individually. (see further
description!)
1. Installation:
1.1Connecting the PS/2 keyboard & PS/2 mouse to the Ultimate Adapter:
- Connect the PS/2 port of the mouse and of the keyboard to the ports on the front of the
Ultimate Adapter.
- The mouse is connected to the right input (green) and the keyboard to the left input (purple).
The inputs are marked with colours in order to facilitate the connecting process.
1.2Connecting the Ultimate Adapter to your video game console:
- Connect the Ultimate Adapter which is connected to the mouse and to the keyboard to any
controller port of your console.
- The lighting up of the LEDs of your keyboard indicates that the Ultimate Adapter functions
and that the keyboard as well as the mouse are correctly connected to the device.
2. Programming:
2.1 Configure an own occupancy for the keyboard and the mouse:
- Press the button "ESC" on the connected keyboard, the red programme LED on the Ultimate
Adapter begins to flash slowly.
- Confirm now the corresponding button on the keyboard or on the mouse with the desired
controller function which you want to assign anew. (see table)
- The red programme LED begins to flash faster and then goes out. Now the functionality has
been transferred to the button you have chosen.
- Repeat this process for all the other buttons on the controller which you want to change or
occupy.
2.2 Store the configuration:
- When you have configured all buttons as described above, you have the possibility to store
this configuration under F1-F8. You can store eight different configurations.
- Press the button “ESC”, the red programme LED begins to flash slowly.
- Press now alternatively the button "F1-F8" and the red programme LED goes out. Your
configuration is stored now.
2.3 Recall the configuration:
- Press the “ALT” button and the “F1-F8” button for your respective configuration. This
can also be done during the game.
LL
Quick Guide for Ultimate Adapter for Xbox
®
5
4. Tabellen
4.1 Standard Konfiguration (Xbox
®
)
Controller Tastatur Maus
Left Stick W,A,S,D
Right Stick I,M,J,L Mouse Move
A SPACEBAR
B E
X R
YY
Left Trigger T Left Button
Right Trigger F Right Button
Left Thumb Z
Right Thumb G
Start ENTER
Back BACKSPACE
Black B
White CAPS LOCK
D-Pad
UP ·
D-Pad Down ‚
D-Pad Left fl
D-Pad Right ‡
4.2 Zuordnungstabelle für Programmierung (Xbox
®
)
Xbox
®
Controller Tastatur Xbox
®
Controller Tastatur
(Controller map keys) (Controller map keys)
A A Left Stick Up Left ALT+·
B B Left Stick Down Left ALT+‚
X X Left Stick Left Left ALT+
fl
Y Y Left Stick Right Left ALT+
‡
SW Tab Right Stick Up Right ALT+·
SB Caps Lock Right Stick Down Right ALT+‚
Left Trigger L Right Stick Left Right ALT+
fl
Right Trigger R Right Stick Right Right ALT+
‡
Start Enter
Back BACK SPACE
Left Thumb Q
Right Thumb P
Up ·
Down ‚
Left
fl
Right
‡
4
To Next Page
Loading...
Need help?
General
