Need help?Do you have a question about the Hameg HMP4030 and is the answer not in the manual?
General| Output Voltage | 0 - 32 V |
|---|---|
| Number of Channels | 3 |
| Ripple and Noise (CC) | < 3 mA RMS |
| Load Regulation (CV) | < 0.01 % + 2 mV |
| Load Regulation (CC) | < 0.01 % + 3 mA |
| Line Regulation (CV) | < 0.01 % + 2 mV |
| Line Regulation (CC) | < 0.01 % + 3 mA |
| Temperature Coefficient (CV) | < 100 ppm/°C |
| Temperature Coefficient (CC) | < 100 ppm/°C |
| Display Type | LCD |
| Interface | USB, LAN, GPIB (optional) |
| Operating Temperature | 0 °C to +40 °C |
| Storage Temperature | -20 °C to +70 °C |
| Protection | Overvoltage, Overcurrent, Overtemperature |
| Output Current | 0-3A |
| Ripple and Noise (CV) | < 1 mVrms / 5 mVpp |
To Next Page
