7
Water: Please use ordinary tap water. If you have extremely
hard water, alternate between tap water and distilled water
for use in the iron.
1. Follow Steps 1 through 5 in
“To Steam Iron.”
2. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches (15 cm) away
from garment and press and release
the Blast Button to steam out wrinkles. Do not press
Blast Button more than once every 5 seconds.
4. To turn iron off, set Set Steam ON/OFF Control to O
(Dry Iron). Turn the Temperature Control Dial to OFF.
Unplug iron.
5. Empty water from the iron following directions in “Caring
and Cleaning.”
NOTICE: Do not allow hot soleplate to touch delicate
garments.
To Steam Iron (cont.)
To Vertical Steam
840164303 ENv01.indd 7840164303 ENv01.indd 7 8/22/14 1:06 PM8/22/14 1:06 PM
To Next Page
Loading...
